Cableclub.com

Mini DisplayPort Male to DisplayPort Female Adapter Black(Halogen-Free) AMD approve

This adapter lets you connect a displayport interface digital display to a PC with a Mini DisplayPort interface for easy connectivity.

Product Features:

1. Compliant with DisplayPort Interoperability specification V1.1a.

2. Mini DisplayPort male to DisplayPort female.

3. Long product life: 10,000 cycles of insertion and withdrawal.

4. 15cm in length. Easy to carry.

Cable Electrical Characteristics:

1. Rating : TEMP 80℃ ; VOLTAGE 30V

2. Conductor Resistance: at 20℃ MAX 32AWG:588.85Ω/km;

3. Insulation Resistance: 10MΩ-km min at 20℃ dc 500V.(EIA-364-21)

4. Dielectric Strength: AC 500V/1minute no breakdown. (EIA-364-20)

5. Impedance: Pairs(differential mode) 100±5Ω

6. Propagation Delay: 4.50 ns/m (nom)

7. Propagation Delay Skew: Intra pair Max 50ps/cable. Inter pair Max 4000ps/cable

8.Attenuation(max): 5.02 dB @100~450MHz; 7.695dB @1GHz; 12.595dB @

2GHz; 17.495dB @ 3GHz; 22.395dB @4GHz; 27.295dB@ 5GHz; 32.195dB@ 6GHz; 37.095dB @ 7GHz

9.Return Loss(min): 15.00 @100~675MHz;12.90 @1GHz; 9.20 @ 2GHz; 7.04 @ 3GHz; 5.50 @ 4GHz; 4.31 @ 5GHz; 3.33@ 6GHz ;2.51 @ 7GHz;

10.NEXT(max): -26dB @0.1~1.35GHz; -23.44dB @2GHz, -20.80dB @3GHz; -18.93dB @4GHz; -17.48dB @5GHz; -16.29dB @6GHz; -15.28dB @7GHz;

11.FEXT: -26dB/cable @100~7000MHz (max)

Physical Properties of Jacket:

1.Tensile Strength: Unaged: 1500PSI min Aged: 70% min

2. Elongation: Unaged: 100% min Aged: 65%

3. Heat shock test: NO CRACKING

4. Cold bend test: NO CRACKING

5. Deformation test: MAX 50%

6. Flame test: PASS VW-1

What is ATI Eyefinity Technology?

ATI Eyefinity Technology from AMD provides advanced multiple monitor technology delivering an incredibly immersive graphics and computing experience with innovative display capabilities, supporting massive desktop workspaces and super-high resolution gaming environments.

Legacy GPUs have supported up to two display outputs simultaneously and independently for more than a decade. Until now graphics solutions have supported more than two monitors by combining multiple GPUs on a single graphics card. With the introduction of AMDs next-generation graphics products series supporting DirectX® 11, a single GPU now has the advanced capability of simultaneously supporting up to six independent display outputs.

More information

Mini DisplayPort Male to VGA Female Adapter Cable, AMD approved

This adapter lets you connect a VGA interface display to a PC with a Mini DisplayPort interface for easy connectivity.

Product Features:

n DisplayPort 1.1a compliant receiver offering 1.62 and 2.7Gbps over 4 lanes.

n Video resolution up 1920 X 1200 X 60Hz.

n PC: VGA, XGA, SVGA, SXGA, UXGA and WUXGA.

n Long product life: 10,000 cycles of insertion and withdrawal.

n 17cm in length. Easy to carry.

Cable Electrical Characteristics:

1. Rating : TEMP 80℃ ; VOLTAGE 30V

2. Conductor Resistance: at 20℃ MAX 32AWG:588.85Ω/km;

3. Insulation Resistance: 10MΩ-km min at 20℃ dc 500V.(EIA-364-21)

4. Dielectric Strength: AC 500V/1minute no breakdown. (EIA-364-20)

5. Impedance: Pairs(differential mode) 100±5Ω

6. Propagation Delay: 4.50 ns/m (nom)

7. Propagation Delay Skew: Intra pair Max 50ps/cable. Inter pair Max 4000ps/cable

8.Attenuation(max): 5.02 dB @100~450MHz; 7.695dB @1GHz; 12.595dB @2GHz; 17.495dB @ 3GHz; 22.395dB @4GHz; 27.295dB@ 5GHz; 32.195dB@ 6GHz; 37.095dB @ 7GHz

9.Return Loss(min): 15.00 @100~675MHz;12.90 @1GHz; 9.20 @ 2GHz; 7.04 @ 3GHz; 5.50 @ 4GHz; 4.31 @ 5GHz; 3.33@ 6GHz ;2.51 @ 7GHz;

10.NEXT(max): -26dB @0.1~1.35GHz; -23.44dB @2GHz,

-20.80dB @3GHz; -18.93dB @4GHz; -17.48dB @5GHz; -16.29dB@6GHz; -15.28dB @7GHz;

11.FEXT: -26dB/cable @100~7000MHz (max)

Physical Properties of Jacket:

1.Tensile Strength: Unaged: 1500PSI min Aged: 70% min

2. Elongation: Unaged: 100% min Aged: 65%

3. Heat shock test: NO CRACKING

4. Cold bend test: NO CRACKING

5. Deformation test: MAX 50%

6. Flame test: PASS VW-1

What is ATI Eyefinity Technology?

More information

Mini DisplayPort to HDMI Adapter Black(Halogen-Free) AMD approve

This adapter lets you connect a HDMI interface digital display to a PC with a Mini DisplayPort interface for easy connectivity

Product Features:

n Compliant with DisplayPort Interoperability specification V1.1a.

n Compliant with HDMI 1.3a specification up to 2.25 Gbps.

n PC: VGA, SVGA, XGA, SXGA, and UXGA.

n HDTV: 480i, 576i, 480p, 576p, 1080i and 1080p.

n Long product life: 10,000 cycles of insertion and withdrawal.

n 18cm in length. Easy to carry.

Cable Electrical Characteristics:

1. Rating : TEMP 80℃ ; VOLTAGE 30V

2. Conductor Resistance: at 20℃ MAX 32AWG:588.85Ω/km;

3. Insulation Resistance: 10MΩ-km min at 20℃ dc 500V.(EIA-364-21)

4. Dielectric Strength: AC 500V/1minute no breakdown. (EIA-364-20)

5. Impedance: Pairs(differential mode) 100±5Ω

6. Propagation Delay: 4.50 ns/m (nom)

7. Propagation Delay Skew: Intra pair Max 50ps/cable. Inter pair Max 4000ps/cable

8.Attenuation(max): 5.02 dB @100~450MHz; 7.695dB @1GHz; 12.595dB @2GHz; 17.495dB @ 3GHz; 22.395dB @4GHz; 27.295dB@ 5GHz; 32.195dB@ 6GHz; 37.095dB @ 7GHz

9.Return Loss(min): 15.00 @100~675MHz;12.90 @1GHz; 9.20 @ 2GHz; 7.04 @ 3GHz; 5.50 @ 4GHz; 4.31 @ 5GHz; 3.33@ 6GHz ;2.51 @ 7GHz;

10.NEXT(max): -26dB @0.1~1.35GHz; -23.44dB @2GHz, -20.80dB @3GHz; -18.93dB @4GHz; -17.48dB @5GHz; -16.29dB @6GHz; -15.28dB @7GHz;

11. FEXT: 26dB/cable @ 100~7000MHz(MAX)

Physical Properties of Jacket:

1.Tensile Strength: Unaged: 1500PSI min Aged: 70% min

2. Elongation: Unaged: 100% min Aged: 65%

3. Heat shock test: NO CRACKING

4. Cold bend test: NO CRACKING

5. Deformation test: MAX 50%

6. Flame test: PASS VW-1

What is ATI Eyefinity Technology?

More information

Mini DisplayPort Male to DVI Female Adapter Black(Halogen-Free)

Mini DP Plug to DVI Female

Adapter Cable

This adapter lets you connect a DVI interface digital display to a PC with a Mini DisplayPort interface for easy connectivity.

Product Features:

n Compliant with DisplayPort Interoperability specification V1.1a.

n Compliant with DVI 1.1 specification up to 1.65 Gbps.

n PC: VGA, SVGA, XGA, SXGA, and UXGA.

n HDTV: 480i, 576i, 480p, 576p, 1080i and 1080p.

n Long product life: 10,000 cycles of insertion and withdrawal.

n 21.5cm in length. Easy to carry.

Cable Electrical Characteristics:

1.Rating : TEMP 80℃ : VOLTAGE 30V
2.Conductor Resistance : AT 20℃ MAX 30AWG : 376.96Ω/km

3.Fext ＜-20 dB

4.Impedance : 100±10Ω

5.Attenuation : 0.3~825MHz ＜5dB/2.5M
              0.825~2.475GHz ＜5~12dB/2.5M
              2.475~4.125GHz ＜12~20dB/2.5M
              4.125~5.10GHz ＜20~25dB/2.5M
6.Time Delay Skew : within a pair ≦ 112ps/cable
                   between pairs ≦ 1.78ns/cable

Physical Properties of Jacket:
1.Tensile Strength : Unaged : 1500PSI min Aged : 70% min
2.Elongation : Unaged : 100% min Aged : 65%
3.Heat shock test : NO CRACKING

4.Cold bend test : NO CRACKING

5.Deformation test : MAX 50%

6.Flame test : PASS VW-1

What is ATI Eyefinity Technology?

Legacy GPUs have supported up to two display outputs simultaneously and independently for more than a decade. Until now graphics solutions have supported more than two monitors by combining multiple GPUs on a single graphics card. With the introduction of AMDs next-generation graphics products series supporting DirectX® 11, a single GPU now has the advanced capability of simultaneously supporting up to six independent display outputs.

More information

Bluetooth Audio Receiver

Receives wireless streaming of music from any Bluetooth audio transmitter

Built-in microphone supports smart phone, VoIP connection

Easy to tack into your pocket

Auto-shutdown for power saving

iPhone 3GS v3.1.2 Compatible; music streaming and handsfree headset (A2DP & Hands-free)

iPhone 2G/3G Compatible; Hands-free only

null

1/9

BSR202

Introduction

The BSR202 is a Bluetooth Audio Receiver that accepts signals from either a Bluetooth audio transmitter (AV Profile) or Bluetooth enabled cellular phone (Hands Free Profile). The BSR202 can be paired with a Bluetooth audio transmitter to turn your existing wired stereo headset wireless, or simply pair BSR202 with a Bluetooth enabled computer to play audio across the room without any wire. It is a perfect upgrade to your stereo system and MP3 player.

Specification

Audio Connector	3.5mm male/female audio jacks
Audio Output Power	> 20mWrms
Dimension	65 (H) x 25 (W) x 22 (D) mm
Frequency	2402 ~ 2480 MHz
Humidity	0 ~ 95%
Other	> 8 hrs play time Audio THD: <-83dB Audio S/N: > 85dB Audio Frequency Range: 20Hz ~ 22kHz Audio Streaming Format: SBC 48.000kHz
Power Requirement	Lithium Polymer Battery Built-in
Rx Sensitivity	< -80dBm (BER 0.1%)
Standards	Bluetooth specification V1.2 compliant Bluetooth A2DP profile (AV Profile) Bluetooth AVRCP profile Headset and handfree profile
Temperature	Operating: 0°C ~ 60°C
Tx Power	0.25 ~ 2.5mW (Bluetooth Power Class II)
Weight	29.5g
Wireless Distance	> 10m (open space)

Bluetooth Stereo Audio Transmitter & Receiver

DESCRIPTION

This set of Bluetooth Stereo Transmitter & Receiver enables users to instantly turn their existing stereo system into wireless. The Bluetooth Audio Transmitter sends music using Bluetooth technology; this device can be plugged into audio jacks of your MP3, PC, notebook, TV, DVD player, etc.

The Bluetooth Audio Receiver turns regular audio output devices, such as headphones, into Bluetooth Stereo-ready.

Both devices automatically search and pair with another, no programming, no hassle, just power ON and enjoy. Furthermore, they can be used separately to connect to other Bluetooth Stereo-ready devices. Once paired, you can listen to your favorite high quality music without any wires. It is a perfect choice for mobile entertainment and great add on accessories for your home entertainment A/V system.

FEATURES

Hands-free for Bluetooth enabled mobile phones
Streaming of music sources from PC, MP player, etc.
Automatically paired with stereo Bluetooth - ready devices
No software installation is required
Rechargeable lithium-ion batteries
Easy to use control
LED indicators for power status

MODEL: XB202

TRANSMITTER & RECEIVER SPECIFICATIONS

Standards	Bluetooth specification V1.2 compliant Bluetooth A2DP profile (AV Profile) Bluetooth AVRCP profile (receiver only) Headset and handfree profile (receiver only)
Frequency Band	2402 ~ 2480 MHz
Tx Power	0.25 ~ 2.5mW (Bluetooth Power Class II)
Rx Sensitivity	< -80dBm (BER 0.1%)
Distance	> 10m (open space)
Audio Connector	3.5mm male/female audio jacks
Audio Streaming Format	SBC 48.000kHz
Audio Frequency Range	20Hz ~ 22kHz
Audio S/N	> 85dB
Audio THD	<-83dB
Audio Output Power	> 20mWrms
Power Supply	Lithium Polymer Battery Built-in > 8 hrs play time
Physical Specification	Transmitter: 75 (H) x 26 (W) x 14 (D) mm Weight: 26.5g Receiver: 65 (H) x 25 (W) x 22 (D) mm 29.5g
Environmental Range	Operating Temperature: 0蚓 ~ 60蚓 Humidity: Relative humidity 0 ~ 95%

Bluetooth Stereo Headset & Transmitter

DESCRIPTION

The Bluetooth Stereo Headset plays music from a Bluetooth Stereo Transmitter and talks on a Bluetooth equipped mobile phone. Sporty neckband, compact size, slim design & built-in microphone function offer a fashion, comfort, and state of art technology in one headset. Wearing it, you can listen to your favorite high quality music without any wires, and once you get a phone call coming in, with a simple push of a button, the headset switches to answer the call. With the headset, you will never miss another call while enjoying your music.

FEATURES

Hands-free for Bluetooth enabled mobile phones
Streaming of music sources from PC, MP player, etc.
Automatically paired with stereo Bluetooth headset/transmitter
No software installation is required
Rechargeable lithium-ion batteries
Easy to use 5-way buttons
LED indicators for power status

MODEL: BPMH203

HEADSET SPECIFICATIONS

Standards	Bluetooth specification V1.2 compliant Bluetooth A2DP profile (AV Profile) Bluetooth AVRCP profile Headset and handfree profile Power save mode (power sleep mode)
Frequency Band	2402 ~ 2480 MHz
Tx Power	0.25 ~ 2.5mW (Bluetooth Power Class II)
Rx Sensitivity	< -80dBm (BER 0.1%)
Distance	> 10m (open space)
Audio Streaming Format	SBC 48.000kHz
Audio Frequency Range	20Hz ~ 22kHz
Audio S/N	> 85dB
Audio THD	<-83dB
Audio Output Power	> 20mWrms
Power Supply	Lithium Polymer Battery Built-in > 5 hrs play time
Physical Specification	Dimension: 180x140x60 mm (max), 98x72x75 mm (min) Weight: 62gm
Environmental Range	Operating Temperature: 0蚓 ~ 60蚓 Humidity: Relative humidity 0 ~ 95%

TRANSMITTER SPECIFICATIONS

Standards	Bluetooth specification V1.2 compliant Bluetooth A2DP profile (AV Profile)
Frequency Band	2402 ~ 2480 MHz
Tx Power	0.25 ~ 2.5mW (Bluetooth Power Class II)
Rx Sensitivity	< -80dBm (BER 0.1%)
Distance	> 10m (open space)
Audio Connector	Audio stereo jack 3.5mm
Audio Streaming Format	SBC 48.000kHz
Audio Frequency Range	20Hz ~ 22kHz
Audio S/N	> 85dB
Audio THD	<-83dB
Audio Output Power	> 20mWrms
Power Supply	Lithium Polymer Battery Built-in > 8 hrs play time
Physical Specification	75 (H) x 26 (W) x 14 (D) mm
Environmental Range	Operating Temperature: 0蚓 ~ 60蚓 Humidity: Relative humidity 0 ~ 95%
Power Switch	Power on/off
Power Charge Connector	0.8mm DC In connector/5V input

HEADSET USER INTERFACE

Switch	UP: volume up DOWN: volume down PREV: previous trackl NEXT: next track
Power Switch	Play / mute / answer call / reject call / power on (hold for 2 Sec) / power off (hold for 3 Sec)
Power Charge	0.8 DC In jack
LED	Discovery: blue on Linked: blue blinking Low battery indicator: red blinking Charge: red on

HEADSET CELL PHONE SUPPORT LIST

Nokia	3600,3660,6230,6600,6670,6820,7610,N-Gage
Motorola	A768i,A780,E398,V3,V600,V710
Sony-Ericsson	T68i,P800,P900,T610,Z600,S700i,K700i
Siemens	SX1,U15
Panasonic	X70
Fujitsu	F900iT
BlackBerry	7100t

Foldable Bluetooth Stereo Headset

DESCRIPTION

The Bluetooth Stereo Headset supports streaming music wirelessly. By connecting the headset to the PC via Bluetooth USB Dongle, the user can listen to hours of music available on their PC without the hassle of cords. With the easy adjusting design, the users enjoy sheer and unsurpassed comfort. Perfect for travel entertainment or as an add-on for your home entertainment system.

FEATURES

Streaming of music sources in PC
Replaceable AAA battery for long lasting play
Windows 2000, XP compatible
Easy controllable via 2 buttons
Comfortable headband
No Wire for easy to put on and take off
Stylish
Easy setup

MODEL: BSH202

SPECIFICATIONS

Standards	Bluetooth specification V1.2 compliant Bluetooth A2DP profile (AV Profile)
Frequency Band	2402 ~ 2480 MHz
Tx Power	0.25 ~ 2.5mW (Bluetooth Power Class II)
Rx Sensitivity	< -80dBm (PER 1%)
Distance	< 10m (open space)
Audio Streaming Format	SBC Max 2000kbps, 48.000kHz
Audio THD	< -83dB
Audio Output Power	> 20mWrms
Battery Life	Music play: > 6hrs. (with 2 AAA batteries)
Physical Specification	Dimension: 195mm (L) x 155mm (W) x 90mm (H) Foldes size: 110mm (L) x 115mm (W) x 90mm (H) Weight: 170g (excluding batteries)
Environmental Range	Operating Temperature: -10 ~ 50 ?/font>C Humidity: relative humidity 0 ~ 95%
EMC Certifications	FCC, CE, BQB
Audio S/N	> 85dB
Supported OS	Windows 2000/XP

Bluetooth Stereo Headset

Streaming of music sources in PC

Comfortable headband

No Wire for easy to put on and take off

Replaceable AAA battery for long lasting play

Windows 2000, XP compatible

Easy controllable via 2 buttons

Stylish

Easy setup

null

1/6

BSH201Bluetooth Headset

BSET201

Introduction

Specification

Audio Output Power	> 20mWrms
Dimension	165mm (L) x 155mm (W) x 75mm (H)
EMC Certifications	FCC, CE, BQB
Frequency	2402 ~ 2480 MHz
Humidity	Relative humidity 0 ~ 95%
Other	Audio Streaming Format: SBC Max 2000kbps, 48.000kHz Audio Frequency Range: 20Hz ~ 22kHz Audio THD: < -83dB Audio S/N: > 85dB Music play: > 6hrs. (with 2 AAA batteries)
Rx Sensitivity	< -80dBm (PER 1%)
Standards	Bluetooth specification V1.2 compliant Bluetooth A2DP profile (AV Profile)
Supported OS	Windows 2000/XP
Temperature	Operating: -10 ~ 50 °C
Tx Power	0.25 ~ 2.5mW (Bluetooth Power Class II)
Weight	175g (excluding batteries)
Wireless Distance	< 10m (open space)

Document & Software

User Manual

Multi-Homing QoS Network Security Gateway

FEATURES

High WAN-LAN throughput (66Mbps tested with TTCP, 31Mbps using FTP)
2 WAN Load Balancing
Anomaly Flow IP
QoS (Quality of Service)
Hardware VPN (IPSec/PPTP)
Firewall
Anti-I.M., Anti-Worm, Anti-P2P, Anti-Download, URL Block, Anti-Upload
Hardware DMZ Transparent Mode
Multi-Subnet NAT & Routing
Policy Base Access Control
Content Filter
24x7 Time Schedule
Network Attack Protections
Authentication User or Group
Top N & Accounting Report
No limit on # of users
Web UI
Log & Statistics & MRTG

SPECIFICATIONS

CPU	Intel IXP425
Memory	8MB Flash Memory 64 MB SDRAM
Interface	2 x 10/100Mbps WAN Ethernet port Auto MDIX 1 x 10/100Mbps LAN Ethernet ports Auto MDIX 2 x 10/100Mbps DMZ Ethernet port Auto MDIX
# of DMZ Forwarding	DMZ Transparent Mode: unlimited NAT Mode: maximum 16 mappings to internal DMZ IPs
LED	1 x Power 1 x Status 2 x WAN 1 x LAN 1 x DMZ
Power Supply	External, DC 5 Volt, 2.4A
Form Factor	8" Desktop
Weight	885 g
Operating Temperature	0~60蚓
Operating Humidity	-5~95% non-condensing
EMC Certification	FCC Class A CE BSMI

Broadband Firewall VPN Gateway - Protect Your Network!

OVERVIEW

With the explosive growth of the Internet, accessing information and services at any time, day or night has turned out to be a standard requirement for all enterprises. Managing enterprise network resources is an increasing challenge for many corporate network operators. The security issue is repeatedly addressed in all enterprises. To diminish the risk of exposing your network while surfing the Internet is now unquestionably a major concern for all.

XR-3106 implements sophisticated, yet integrated solutions designed to protect and secure the integrity of network data. It enables organizations to utilize cost-effective public Internet transport to connect remote offices and remote users to the main corporate site, thus eliminating expensive dedicated WAN links and modem banks. Furthermore, the advent of cost-effective, high-bandwidth technologies like DSL, organizations can use VPNs to reduce their connectivity costs while simultaneously increasing remote connection bandwidth. It finds a way out to secure access as well as to enable connectivity, making the network easier to use and more secure.

FEATURES

VPN-Virtual Private Network:

Enables corporate customers to establish secure, end-to-end, private network connections by using public-access data wire, like Internet, to connect private-user nodes.
Use encryption and other security mechanisms to ensure that only authorized users can access the network and that the data cannot be intercepted.

Content Filter:

URL Blocking: tracking and denying of user access to undesirable web sites based on predefined site content.
General Blocking: blocking web pages contains applications of Cookie/Java/ActiveX/Popup likely used by hackers as Trojan horse

Server Load Balancing:

Supports up to 4 virtual servers via one legal IP
Distributes traffic efficiently and evenly among network servers so that no individual server is overburdened. Distribute traffic evenly, skipping errant servers, and provide an additional level of fault tolerance to enhance performance, reliability, and scalability

SPECIFICATIONS

Firewall
Hacker Alert	DoS auto-detect and block attacks; Ping of Death, IP Spoofing, TearDrop, PortScan, LAND, SYN attack, block the traffic and email notification
Connection Modes	Transparent and NAT modes combined between WAN/LAN/DMZ
Connection Modes	Management by object-network, user, service; defining source, destination, and service; setting rule policy by action
Network Rule-Policy Management	Schedule, log and threshold
Multi-NAT	Permits many users on same/different subnets to share a single external IP address at the same time
DDNS	Dynamic DNS allows customers to alias a dynamic IP address to a static hostname, so that web site can be more easily accessed by specific name through the IP address comes dynamically
DNS Proxy	DNS Cache; bandwidth saving
Attack Alert	Real time log and email notification for hacker attack
DHCP	Supports PPPoE, DHCP Client, DHCP server for ADSL/Cable environment
VPN (Virtual Private Network)
Tunnels	Concurrent VPN tunnel
Algorithm	Class-base queuing; TCP Windows-sizing
VPN Gateway	Site to site IPSec; PPTP VPN Server
Sever Load Balancing
Virtual Server	Support Socket Prot Number (Virtual Server) convert
Server Load Balancing	Supports up to 4 virtual servers via a legal IP address for distributing traffic evenly and efficiently.
Content Filter
URL Blocking	Tracks and denies user's access to undesirable web sites based on predefined site content
General Blocking	Blocks web pages containing Cookie/Java/ActiveX/Popup applications which are likely used as Trojan horse by hackers
General Specifications
Network Interface	Four switch ports (or LAN port) One external port ( or WAN port) One DMZ port
Management	Firewall, VPN, Server Load Balancing, Content Filter
CPU	Waveplus RISC
Flash	Memory8 Mbyte
SDRAM	32Mbyte
Throughput	VPN mode: 1.2Mbps
Throughput	NO VPN mode: 12Mbps
Safety Certificate	ICSA, FCC, UL, CE, CUL, TUV
NOTE: [Unless otherwise specified, our routers are NOT AOL compatible.]

24-Port + 2 Giga (optional) SNMP Switch

24-Port + 2 Giga (optional) SNMP Switch

Auto-Negotiation and Auto-MDIX on all 10/100/1000M copper ports

3M byte packet buffer and 1M byte control buffer

Support Head-of-Line blocking prevention

[24] 10/100 RJ-45 ports, and 1 optional Gigabit module : copper or fiber module

Non-blocking, full-line speed, store-and-forward

Unique LED display for fan status: normal or fail

Provides non-blocking and Head-of-line blocking prevention

Up to 14K MAC entries and 4K VLAN entries

Support port-based VLAN and 802.1Q tag VLAN

Support flow control for both half/full duplex operation

Support broadcast storm filtering

Support Port-Trunking with flexible load distribution control and fail-over functions

Provide 7 trunk groups of up to 4 member ports within 26 ports

LED display for each port status: link, activity and speed

Support IP Multicast, IGMP snooping

Support 2-level priority queuing

Support Port-Trunking with flexible load distribution control and fail-over functions

Support ingress port security mode

Support RMON group 1,2,3,9

Support Web/SNMP managed function with friendly user interface

Introduction

XP-3326 is a high performance web-managed SNMP Layer 2 switch that provides users with 24-port 10/100Mbps Ethernet switch and 2 Gigabit ports. It is very suitable for company to build network not only at the beginning phase but also expanding in the future. SNMP management, remote control capability, and other high quality functions, make user feel, but, yet, in control. Gigabit module can be either copper or fiber media, it supports 1000BASE-SX, 1000Base-LX or 1000BASE-T allowing users to increase their network response time at gigabit speeds and with great flexibility. A RS-232 serial port provides an easy way for installation and initial set-up. Non-blocking and maximum wire speed performance are designed into all switch ports, it not only supports Auto-Negotiation and but also AUTO-MDIX function on Auto-Negotiation on every 24-port switch, and on two Gigabit Copper ports, regardless half/full duplex mode. The result of these functions is a fully automated ports; plug-n-play. XP-3326 provides a convenient way to operate layer 2 management through internet browser. User friendly pull-down manual results in easy to learn, easy to control and easy to monitor. XP-3326 supports not only traditional SNMP function, but it also supports RMON 1,2,3,9 groups for advanced network analysis. Uniquely, it supports both port-based VLAN and Tag-based VLAN to catch-up the application needed in coming VLAN age. To increase bandwidth application, it supports 7 groups with up to 4 ports Trunk, and moreover, these trunk ports have fair-over function to provide redundant back-up when one or more ports are not functioning properly. Totally front access design and complete LED status display ease user?s installation, inspection, and maintenance efforts at rackmount level. In addition, extra LED display reflects the fan's status to further secure user?s investment.

Specification

Approval	CE mark, Class A FCC Part 15 Class A
Data Rate	10BaseT: 14880 packets per second per port 100BaseTX: 148810 packets per second per port 1000BaseTX: 1488100 packets per second per port
Dimension	440mm (W) X 184mm (D) X 44mm (H)
Humidity	Operating: 10%-90%, non-condensing
Interface	1] SMII/GMII interface for optional Gigabit module and 100M module [1] RS232 connector [24] 100BaseTX RJ-45 STP Ethernet ports (switched ports)
LED Indicator	[1] Self-diagnostic LED: Blinking (During power-on-diagnostics) [1] Power LED: Green (NORMAL) Speed LEDs: 1~24 ports (Right corner of each RJ-45 port) Green (100M), Vanish (10M) FAN LED: FAN1 Red (Left side fan fail) Port LEDs: 1~24 ports (Left corner of each RJ-45 port) Green (Link-OK), Blinking (ACTIVITY)
Memory	4/2K 128-bit, programmable size for VLAN entries 14/10/8/6K 64-bit, programmable size for MAC entries 1M byte for control, 3M byte for packet buffers
Power Consumption	35 Watts max
Power Requirement	100-240VAC, 50/60Hz
Standards	IEEE 802.3u 100BaseTX Fast Ethernet IEEE 802.1v port-based VLAN IEEE 802.3z 1000BaseSX Gigabit Ethernet IEEE 802.3 10BaseT Ethernet IEEE 802.1Q VLAN IEEE 802.3x flow control
Temperature	Storage: -20 to 70 centigrade Operating: 5 to 45 centigrade
Weight	2.3 kg

Document & Software

User Manual

Hawking Technology Broadband Booster

Broadband Booster

Boost your internet application speeds up to 400%

Compatible with all home or work networks

Great for networks with more than one computer

Eliminates lag in online Xbox, PS2, Gamecube and PC Gaming

Plug and Play installation

Improves e-mail, VoIP, web cam, instant messaging, etc.

Introduction

The Broadband Booster, perfectly handles the annoyance you may encounter when multiple Internet applications such as VoIP phone calls, streaming videos, and online games run simultaneously on a single broadband network, which makes everything play in slow motions. The Broadband Booster is an ideal device for making all your problem of Internet lag vanished by prioritizing all data, enhancing the playability of online games, maintaining VoIP quality and improving the performance of all real-time application. Now you can put away all the hassles of any troublesome installation, the Broadband Booster is free of configuration. With the simplicity of only one step, just connect the Broadband Booster to your existing network and you are ready to enjoy the real maximum high-speed Internet surfing!

Specification

EMC Certifications	CE Class B FCC Class B
Interface	1 x Internet Port (10/100 RJ-45) 1 x Router Port (10/100 RJ-45)
LED Indicator	Boost Router Internet Power
Power Requirement	5VDC / 1.5A
Standards	IEEE 802.3 / IEEE 802.3u

8 Port 10/100/1000 Smart Switch

8 Port 10/100/1000 Smart Switch

[4] 10/100/1000Mbps auto-sensing Ethernet ports

Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX and IEEE 802.3ab 1000Base-T standards

"Store and Forward" architecture

IEEE 802.3x or Back Pressure (HDX) Flow Control

8K MAC Address table supported

Four Classes of Service (CoS) selectable per port basis and/or checked via IP header and 802.1Q VLAN

Support 4 port-based VLANs

Configurable to 10 full/half duplex, 100 full/half duplex and 1000 full duplex for each port

Broadcast throttling

Port Mirroring for debugging network problems

Console Port: Support on a RS-232C console port for switch configuration change

Introduction

In today's enterprise environments that require more advanced processing, the XS-2204 4 Port 10/100/1000 Gigabit Smart Switch is the best switching hub solution for the backbone of networks handling high capacity data and multimedia data. The XS-2204 Smart Switch complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3x flow control, providing users four ports with auto-negotiation function, which can automatically adjust device speeds at 10/100/1000Mbps for optimum operation; "Store-and-Forward" architecture filters to eliminate error packets and improve efficiency. Plus, based on Auto-MDI/MDIX technology, just use either a straight through or a crossover Ethernet cable, and you can get connected with any other devices. Equipped with Classes of Service (CoS) and 4 port-based VLAN that enables control over packet transfers thorough prioritization of data traffic, the XS-2204 Smart Switch enables flexible network configuration and raises network application availabilities of groupware, databases and so on. All of these expand the range of possibilities on network.

Specification

Approval	FCC Class A, CE
Data Rate	Ethernet: 10Mbps in Half-duplex, 20Mbps in Full-duplex Fast Ethernet: 100Mbps in Half-duplex, 200Mbps in Full-duplex Gigabit Ethernet: 20000Mbps in Full-duplex
Dimension	273 x 161 x 45mm (W x D x H)
Humidity	Operating: 5~95% non-condensing
Interface	[4] 10/100/1000 RJ-45 Ethernet ports One [1] female RS-232C D-sub 9 pin for configuration change
LED Indicator	LINK/ACT: Green-1000Mbps, Orange-10/100Mbps Power: Green FDX/HDX: Green-Full-duplex, Orange-Half-duplex
Memory	4/2K 128-bit, programmable size for VLAN entries 14/10/8/6K 64-bit, programmable size for MAC entries 1M byte for control, 3M byte for packet buffers
Other	CoS (Class of Service): Port-based, 4 groups Flow Control: Full Duplex-IEEE 802.3u, Half Duplex-Back Pressure Access Method: CSMA/CD MAC Address Table: 8K, with Searching, Self-learning, Automatic aging VLAN: Port-based VLAN, 4 groups Switching Scheme: Store-and-Foward
Power Consumption	14W
Power Requirement	AC 100~240V, 50~60Hz
Standards	IEEE 802.3u 100BaseTX Fast Ethernet IEEE 802.3 10BaseT Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3x flow control
Temperature	Operating: 0?C to 50?C
Weight

4 Port 10/100/1000 Smart Switch

4 Port 10/100/1000 Smart Switch

[4] 10/100/1000Mbps auto-sensing Ethernet ports

Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX and IEEE 802.3ab 1000Base-T standards

"Store and Forward" architecture

IEEE 802.3x or Back Pressure (HDX) Flow Control

8K MAC Address table supported

Four Classes of Service (CoS) selectable per port basis and/or checked via IP header and 802.1Q VLAN

Support 4 port-based VLANs

Configurable to 10 full/half duplex, 100 full/half duplex and 1000 full duplex for each port

Broadcast throttling

Port Mirroring for debugging network problems

Console Port: Support on a RS-232C console port for switch configuration change

Introduction

Specification

Approval	FCC Class A, CE
Data Rate	Ethernet: 10Mbps in Half-duplex, 20Mbps in Full-duplex Fast Ethernet: 100Mbps in Half-duplex, 200Mbps in Full-duplex Gigabit Ethernet: 20000Mbps in Full-duplex
Dimension	273 x 161 x 45mm (W x D x H)
Humidity	Operating: 5~95% non-condensing
Interface	[4] 10/100/1000 RJ-45 Ethernet ports One [1] female RS-232C D-sub 9 pin for configuration change
LED Indicator	LINK/ACT: Green-1000Mbps, Orange-10/100Mbps Power: Green FDX/HDX: Green-Full-duplex, Orange-Half-duplex
Memory	4/2K 128-bit, programmable size for VLAN entries 14/10/8/6K 64-bit, programmable size for MAC entries 1M byte for control, 3M byte for packet buffers
Other	CoS (Class of Service): Port-based, 4 groups Flow Control: Full Duplex-IEEE 802.3u, Half Duplex-Back Pressure Access Method: CSMA/CD MAC Address Table: 8K, with Searching, Self-learning, Automatic aging VLAN: Port-based VLAN, 4 groups Switching Scheme: Store-and-Foward
Power Consumption	14W
Power Requirement	AC 100~240V, 50~60Hz
Standards	IEEE 802.3u 100BaseTX Fast Ethernet IEEE 802.3 10BaseT Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3x flow control
Temperature	Operating: 0?C to 50?C
Weight

ExpressCard 1394a/Firewire Host Adapter

OVERVIEW

The E94A is a 1394a/Firewire Host Adapter for Multimedia Application, which is specifically designed to plug into a desktop or laptop equipped with an ExpressCard slot. The E94A has two external 1394a/Firewire ports that can support dozens of 1394a/Firewire devices like video cameras, hard drives, and CDR-W devices

The E94A supports up to 63 devices chained together and multimedia isochronous application (Audio and video applications require a guaranteed isochronous delivery of data to prevent delayed or out-of-order frames). 1394a/Firewire does that, and does it better than USB 2.0.

FEATURES

Compliant with ExpressCard standard
Fully compliant with PCI Express V1.0a
Fully compliant with IEEE 1394-1395
Fully compliant with IEEE standard 1394a-2000
Fully compliant with 1394 OHCI V1.1
TI 1394a OHCI with 2 port PHY controller
Two 1394a/Firewire ports
Data transfer rate up to 2.5Gbps ExpressCard link speed and up to 400Mbps IEEE 1394a/Firewire transfer rate

SPECIFICATIONS

Specification	IEEE standard 1394a-2000 and IEEE standard 1394-1995 ExpressCard standard V1.0 Full x1 PCI Express V1.0a Throughput Max. 400Mbps
Host Interface	High-power ExpressCard Socket powered from PC system, no external power needed Suspend power saving mode supported
Dimensions	54mm (W) x 108mm (D) x 5mm (H)
EMC Certification	FCC Part 15B in US, CE EN55022/EN55024
Supported OS	Windows 98SE/ME/2000/XP/Vista Mac OS 8.6 or above (including OS X and above)

ExpressCard 5 in 1 Card Reader

OVERVIEW

The ExpressCard 5 in 1 Card Reader, ECR500, allows users to read and write different memory cards easily. ECR500 provides access to the most popular kinds of flash memory cards in the market: Memory Stick, Memory Stick PRO, Secure Digital, Multi Media and xD-Picture. ECR500 contains a single monolithic SOC (System-On-Chip) integrated with an enhanced 8051 MCU core, internal program/data memory banks and a variety of flash peripheral cores on it.

FEATURES

HS (480 Mbps) and FS (12 Mbps) transfer
Integrated Fast 8051 microprocessor
File Manager with Auto Disk Drive Icon
Error Correction Control (ECC) capability
Low power consumption
Regulator, Power On Reset and Low Voltage Detector
Supports Memory Stick-PRO 4-bit parallel transfer mode
Supports In System Programmable (ISP)
Two LED indicators
Built-in Watchdog Timer

SPECIFICATIONS

Card Supported

Memory Stick
Memory Stick PRO
Secure Digital
Multi Media
xD-Picture

Data Transfer Rate

	Read (KB/s)	Write (KB/s)
Memory Stick	1430	1202
Memory Stick PRO	3809	2938
Secure Digital	3141	1168
Multi Media	2206	2080
xD-Picture	6240	1211

Operating System

Windows 2000/XP
Mac OS 9.x/10.x
Linux Kernel 2.4 and Red Hat Linux 8.0

ExpressCard to Gigabit Ethernet

OVERVIEW

The EGE5000 (EGE5K-P) is a 10/100/1000M Ethernet ExpressCard, which is specifically designed to plug into a desktop or laptop equipped with an ExpressCard slot.

The EGE5000 (EGE5K-P) provides throughput and connectivity at gigabit speeds up to 1000 Mbps (1Gbps) raw bandwidth, that is 100 times faster than the original Ethernet, yet is compatible with existing Ethernets.

With the innovative design of the foldable connector, the EGE5000 (EGE5K-P) comes with an ultra slim RJ-45 port that is only half the height of regular RJ-45 connectors, making it the thinnest ExpressCard on the market to date. It easy and convenient to carry in your pocket, or simply to store away when not in use.

The EGE5000 (EGE5K-P) enables you to connect your computer via an available ExpressCard slot and your Ethernet and Gigabit network in seconds, you are networked in no time. Plus,

This EGE5000 (EGE5K-P) also features low power-consuming device which draws power from ExpressCard slot directly, thus no external power supply is required.

FEATURES

Compliant with ExpressCard standard
10/100/1000M data rate auto-negotiation
Feature full duplex mode that doubles the network connection speed
Foldable connector for convenient carrying and storage
High-power Bus-power no outside power is required
Easy to read LED indicators
Compact and robust design perfect solution for all network users, both desktop and mobile
Microsoft Plug-and-Play compatible
Easy Installation

SPECIFICATIONS

Network Specification	IEEE 802.3, 802.3u and 802.3x IEEE 802.3ab and 802.3z CAT3/CAT5 UTP/STP cable up to 328ft/100M
Host Interface	High-power ExpressCard Socket powered from PC system, no external power needed Suspend power saving mode supported
LED Indicators	Link status: Amber/Green Activity (TX/RX): Green
Dimensions	107.8mm (W) x 34mm (D) x 8.2mm (H)
EMC Certification	FCC Part 15B in US
Supported OS	Windows 98/2000/ME/XP/Vista

85Mbps PowerLine to Ethernet Bridge

OVERVIEW
The PLE0085 is an advanced device that uses existing electrical wires to transfer digital data signals between Ethernet devices. This plug-and-play device turns any electrical outlet into a home network port in seconds. Just plug the PLE0085 into any electrical outlet (located through-out your house) and your entire household is now wired for easy access for sharing Dial-up, xDSL, or Cable Internet access, with no expensive new wiring or cabling to install. It is designed for ease-of-use, uncomplicated and very quick to install.

Besides the convenience, the PLE0085 brings an assured Ethernet-like transfer rate of up to 85Mbps, which is faster than WLAN 802.11g and yet without radio interference. Thanks to 56-bit DES encryption, total security and privacy is ensured.

FEATURES

Allows concurrent shared Internet access across existing 110V/220V electrical outlets
Auto-MDIX
HomePlug 1.0 Turbo
Compatible with 100 Mbps Ethernet products
Transfer rate up to 85 Mbps
True plug and play; installs in seconds - no software required
Supports Windows 98SE/2000/ME/XP, MAC and any network built-in platforms
56-bit Data Encryption ensures data security and reliability

SPECIFICATIONS

Standards	HomePlug 1.0 Turbo
Connectors	[1] Powerline (PL) [1] RJ-45 Port (LAN)
LEDs	Power: Powerline link LNK/ACT: Ethernet link/activity Ethernet: Powerline Ethernet port link
Speed	Power Line: Up to 85Mbps LAN: 100Mbps; Auto-MDIX
Encryption	56-bit Data Encryption with key management
Physical	Dimension: 72mm (W) x 102mm (L) x 45mm (H) Weight: 160g
Approvals	FCC B, CE
Operating Temperature	0 to 40 degrees Celsius
Storage Temperature	-20 to 70 degrees Celsius

Xterasys Wireless 802.11b/g High Power Access Point with PoE Injector

OVERVIEW
This product changes the way wireless networks are expanded. It combines two of the newest products on the market: High Power AP w/PoE Ready & PoE Injector.

***Note: standalone AC/DC adapter for the Access Point is NOT included, thus, power will be supplied from the PoE Injector directly***

About High Power AP w/PoE Ready...

This is not an ordinary Wireless AP. This Wireless AP is not only an IEEE 802.11b/g compliant Access Point, but it's TX power can be adjusted up to 23dBm. On top of that, this Wireless Access Point has built-in Power over Ethernet (PoE). which allows users to expand the wireless coverage without the need to place this device next to a power outlet.

The Wireless AP provides 64/128 bit WEP/WPA2 TKIP-AES encryption and IEEE 802.1x which ensures a high level of security to protect user's data data and privacy. The MAC Address filter prevents the unauthorized PCs from accessing your Wireless LAN.

FEATURES

Support one PoE port (PD) compatible to IEEE802.3af
Support wireless transmission power up to 23dBm
Support two Ethernet ports
Data rate automatic fallback
Support IP sharing
Automatic channel selection
Client access control
Support WEP, WPA (TKIP/AES), WPA2 (AES/Mixed) encryption
Support IAPP & WDS
Adjustable TX power
Adjustable data rate
Adjustable SSID broadcast
WEP 64/128 bit
Wireless sites survey
Wireless MAC filtering
System event log and statistics

About PoE Injector...

Applications

Wireless LAN Access Point and Bridges
Wireless LAN WiFi Amplifiers and Amplified Antennas
VoIP (Voice over IP) Telephones
IP Surveillance Cameras
Bluetooth Access Points
Web Cameras

FEATURES

48VDC @ 24W Power Supply
100-240 VAC Input
Dual RJ45 Jacks

Model: WAP257POE

Content includes:

1 x Access Point

1 x Antenna

2 x Stands

1 x bag of screws

1 x CD

1 x Manual

1 x PoE Injector

1 x PoE 48V AC/DC Adapter

SPECIFICATIONS

Standards	IEEE 802.11b/g standard IEEE 802.3af
Antenna	Single detachable dipole antenna (RP-SMA2dBi)
Frequency Range	2.412GHz ~ 2.4835GHz
Modulation Technique	802.11b: Direct Sequence Spread Spectrum (PBCC, CCK, DQPSK, DBPSK) 802.11g: Orthogonal Frequency Division Multiplexing (OFDM)
Wireless Data Rate	802.11b: 11/5.5/2/1 Mbps 802.11g: 54/48/36/24/18/12/9/6 Mbps
Coverage Area	Indoor: 100m Outdoor: 300m
Operating Temperature	-5~55 ?/font> C
Storage Temperature	--20~70 ?/font> C
Humidity	90% non-condensing
Output Power	OFDM: 23+/-0.5dBm (54Mbps, 200mW) CCK: 23X/-0.5dBm (11Mbps, 200mW)
Receive Sensitivity	11g: -68dBm 11b: -85dBm
Power Requirement	DC: 12V 0.8A PoE: 48V 0.2A
Physical Specification	Dimension: 128 x 89 x 27 (mm) ( W x D x H ) Weight: 147g
EMC Certification	FCC/CE

Xterasys Wireless 802.11b/g High Power Access Point with PoE Ready

OVERVIEW
This is not an ordinary Wireless AP. This Wireless AP is not only an IEEE 802.11b/g compliant Access Point, but it's TX power can be adjusted up to 23dBm. On top of that, this Wireless Access Point has built-in Power over Ethernet (PoE). which allows users to expand the wireless coverage without the need to place this device next to a power outlet.

FEATURES

Support one PoE port (PD) compatible to IEEE802.3af
Support wireless transmission power up to 23dBm
Support two Ethernet ports
Data rate automatic fallback
Support IP sharing
Automatic channel selection
Client access control
Support WEP, WPA (TKIP/AES), WPA2 (AES/Mixed) encryption
Support IAPP & WDS
Adjustable TX power
Adjustable data rate
Adjustable SSID broadcast
WEP 64/128 bit
Wireless sites survey
Wireless MAC filtering
System event log and statistics

Model: WAP257

SPECIFICATIONS

Standards	IEEE 802.11b/g standard IEEE 802.3af
Antenna	Single detachable dipole antenna (RP-SMA2dBi)
Frequency Range	2.412GHz ~ 2.4835GHz
Modulation Technique	802.11b: Direct Sequence Spread Spectrum (PBCC, CCK, DQPSK, DBPSK) 802.11g: Orthogonal Frequency Division Multiplexing (OFDM)
Wireless Data Rate	802.11b: 11/5.5/2/1 Mbps 802.11g: 54/48/36/24/18/12/9/6 Mbps
Coverage Area	Indoor: 100m Outdoor: 300m
Operating Temperature	-5~55 ?/font> C
Storage Temperature	--20~70 ?/font> C
Humidity	90% non-condensing
Output Power	OFDM: 23+/-0.5dBm (54Mbps, 200mW) CCK: 23X/-0.5dBm (11Mbps, 200mW)
Receive Sensitivity	11g: -68dBm 11b: -85dBm
Power Requirement	DC: 12V 0.8A PoE: 48V 0.2A
Physical Specification	Dimension: 128 x 89 x 27 (mm) ( W x D x H ) Weight: 147g
EMC Certification	FCC/CE

Wireless 802.11b/g Access Point

OVERVIEW

The XA-2622G is an IEEE802.11g compliant Access Point, which lets you connect your Wireless-802.11g or Wireless-802.11b devices to your wireless network. The XA-2622G is not only 802.11b backwards compliant , but also provides a high-speed transfer rate of up to 54Mbps, which is almost five times faster than that of wireless B products.

The XA-2622G can act as a Media Access Control (MAC) bridge between wired Local Area Networks, and single/multi LAN wireless network(s). The XA-2622G provides high-level security for data and privacy during wireless connectivity; the 64/128bit WEP encryption protects your wireless communication, while the MAC Address Filter allows you to provide access to only those wireless nodes with certain MAC Addresses.

FEATURES

High speed for wireless LAN connection up to 54 Mbps.
Web browser-based configuration utility.
Wireless security of 128-bit WEP Encryption
MAC Address Filtering
AP Visibility Modes
Firmware upgradeable
Static IP Address or DHCP
Automatic Device Discovery

Model: XA-2622G

Data Sheet

Installation Guide
User Manual

SPECIFICATIONS

Standards

IEEE 802.11g
IEEE 802.11b
IEEE 802.11
IEEE 802.3u 100BaseTX Fast Ethernet
ANSI/IEEE 802.3 N-Way Auto-Negotiation

Channels & Frequency

USA (FCC): 2.412GHz ~ 2.462GHz (CH1~11)
Europe (CE): 2.412GHz ~ 2.472GHz

Data Rate (wireless)

w/ automatic fallback

54, 48, 36, 24, 18, 12, 11, 9, 6, 5, 5, 2, and 1Mbps

Security

64-bit, 128-bit WEP encryption
MAC address filter
802.1x
WPA (Wi-Fi Protected Access)

Antenna

2dbi

Button

[1] Factory Reset button

LED Indicators

	[ON]	[OFF]	[BLINKING]
Power	(Always on)	-	While upgrading firmware
Ethernet	Link	Not Link	Active
	100Mbps	10Mbps	-
	Full Duplex	Half Duplex	-
Wireless (bridge mode)	Associated	Not associated	-
Wireless (bridge mode)	Ready	Not ready	Try to connect
Wireless	-	-	Active

Management

Web-Based configuration and management

Power

5.0VDC, 1.5A input

Output Power

802.11b: 17dBm
802.11g: 14~17dBm

Receive Sensitivity

802.11b: -80dBm ~ -87dBm
802.11g: -65dBm ~ -82dBm

Physical Dimension

127 x 91.1 x 24.7 (mm) (width x depth x height)

Weight

190g

Temperature

Operating: 0~50 degrees Celsius
Storing: 0~70 degrees Celsius

Humidity

95% maximum (non-condensing)

Safety & Emission

FCC, CE

High Power Wireless 802.11a/b/g Mini-PCI Card

OVERVIEW

FEATURES

Mini-PCI Type IIIB (3B) form factor
Support 802.11a/b/g
Output power up to 20dBm
Complete Security Feature - WEP 64/128, WPA, WPA2, 802.1x
Cisco CCX V1.0, V2.0 and V3.0 Compliance
OS Support: WIndows , WinCE, Linux
Advanced Quality of Service (QoS) - 802.11e, WMM
Linux AP driver available

SPECIFICATIONS

Standards	IEEE 802.11 a/b/g standards compliant
Host Interface	MiniPCI Interface 1.0
Operating Voltage	3.3V +/- 5%
Power Requirements	Operation at 11a: TX 470mA Operation at 11b: TX 480mA Operation at 11g: TX 420mA RX a/b/g mode: Max 200mA Idle a/b/g mode: Max 130mA
RF Connector Type	Coaxial Connector
Frequency Range	802.11b/g: 2.412GHz ~ 2.4835GHz 802.11a: 5.15GHz ~ 5.724GHz 5.725GHz ~ 5.825GHz
Number of Selectable Channels	USA, Canada (FCC): 23 channels Europe (CE): 32 channels (by region) Japan (TELEC): 14 channels
Data Rate	802.11b: 11/5.5/2/1 Mbps 802.11g/a: 54/48/36/24/18/12/9/6 Mbps
Output Power	802.11a: 15~17dBm 802.11b: 18~20dBm 802.11g: 15~17dBm
Receiver Sensitivity	802.11a: -65dBm 802.11b: -80dBm 802.11g: -65dBm
Physical Specifications	Weight: 12g Dimension: 59.6 (L) x 46.6 (W) mm
Certifications	FCC Part 15.247 in US EN300328 and EN300826 (EN301489-17) in Europe

MODEL: WM3210

IEEE 802.11G Wireless MINI PCI

SPECIFICATIONS

54Mbps 802.11g Wireless Mini PCI Card

XG601 incorporates the IEEE802.11g Draft Standard's mandatory modulation schemes CCK and OFDM to ensure backward-compatibility with the installed Wi-Fi base, while OFDM provides the speed required up to 54Mbps for today's high-bandwidth applications.

HARDWARE
HW version	V0.1
Chipset	PRISM GT Intersil Frisbee (ISL3880)
Antenna Connectors	[2] Hirose UFL Connectors
Host Interface	32-bit mini PCI Type IIIA
Data Rate	1/2/5.5/6/9/11/12/18/24/36/48/54 Mbps
RF Output power	17.5dBm (Max)
Power Consumption	TX: 450mA (Max); RX: 280mA (Max)
Voltage	3.3V
Modulation	OFDM with BPSK, QPSK, 16QAM, 64QAM (11g) DBPSK, DQPSK, CCK (11b)
Operating Channels	CH1~Ch11 (4.212GHz~2.462GHz) FCC CH1~CH13 (2.412GHz~2.472GHz) ETSI CH1~CH14 (2.412GHz~2.483GHz) TELEC
ENVIRONMENTAL SPECIFICATIONS
Sensitivity (Estimated Data)	IEEE 802.11g; PER < 10%; 54Mbps -65 dBm IEEE 802.11b; PER < 8 %; 11Mbps -80dBm
Operating Temperature	0~55 degrees Celsius
Storage Temperature	?/span>20~65 degrees Celsius
Humidity	5~95%
Interoperability	802.11b / 802.11g
OTHER SPECIFICATIONS
Supported OS	Windows 98SE/ME/2000/XP
Supported System	Most systems with standard mini PCI interface, but some notebook manufacturers' proprietary BIOS may prevent installation.
Security	64/128-bit WEP Encryption
PHYSICAL SPECIFICATIONS
Weight	<20g
Dimension	59.6mm (L) x 51mm (W) x 3.5mm (H) Mini PCI Type IIIA

Wireless GPRS/GSM Modem PC Card

INTRODUCTION

The Wireless GPRS Modem PC Card is a tri-band Type II card that lets you connect your notebook to GSM and GPRS network. It sends and receives data via mobile telephone networks. Therefore, it allows you to take full advantage to access to your corporate network, e-mail, and the Internet worldwide. Plus, with simple and flexible network installation, you can eliminate the need to pull cable through walls and ceilings, and allow the network to go where wires cannot go.

The Wireless GPRS Modem PC Card is an ideal and perfect solution to connect while you are working off-site, visiting customers, or traveling.

FEATURES

Provides data connectivity at speeds of up to 85.6kbps

GPRS/GSM over-air security with built-in authentication and encryption making it one of the most secure public wireless system in the world.

Uses GPRS/GSM wireless system to connect your notebook computer to your network or the Internet

Provides audio function

Supports PC Card Hot Swap and true Plug & Play

freedom to roam while staying connected

Complies with Windows 98/2000/ME/XP/PocketPC 2002

Easy to install and configure

Model: GP1520

SPECIFICATIONS

Host Interface	PC Card Type II slot
Antenna	Internal Tri-band Antenna
Frequency Band	EGSM Tx : 880~915 MHz EGSM Rx : 925~960 MHz DCS Tx : 1710~1785 MHz DCS Rx : 1805~1880 MHz PCS Tx : 1850~1910 MHz PCS Tx : 1930~1990 MHz
Operation Mode	GPRS multi-slot class 10 mode (up to 4 download channels and 2 upload channels)
Coding Scheme	Supports all coding schemes (1,2,3 and 4)
Device Class	GPRS mobile station class B
SIM Interface	SIM card holder: Type 3V
Data Rate	GPRS data downlink transfer: 85.6 kbps (Max.) GPRS data uplink transfer: 21.4 kbps (Max.) SMS: Over CSD or GPRS connections
Physical Specifications	Weight: 50g Dimension: 125.81 (L) x 54.05 (W) x 11.46 (H) mm

Xterasys 802.11g Wireless LAN PCI Card

OVERVIEW

The 802.11g Wireless LAN PCI Card is a device that connects your desktop to a wireless local area network (LAN). A wireless LAN can share information without the hassle of connecting wires. Based on IEEE 802.11g standard, XN-2526G transmits and receives data over the air at a speed of up to 54Mbps, and with implemented security, XN-2526G can provide safety to your wireless LAN.

FEATURES

Adds 802.11g wireless capabilities to desktop computers, for faster wireless networking available for home or office

Compliant with PCI V2.2 specifications

Backward compatible with existing 802.11b products

Up to 128-Bit WEP Encryption

Up to 54 Mbps High-Speed Transfer Rate

Low power consumption

Easy to install and configure

Model: XN-2526G

SPECIFICATIONS

Standards	IEEE 802.11b, IEEE 802.11g Standard
Host Interface	PCI V2.2 Specifications
Antenna	Dipole Antenna
Operating Frequency Range	USA: 2.412GHz-2.4835GHz
Number of Selectable Channels	USA, Canada: 11 channels Europe: 13 channels Japan: 14 channels
Modulation Technique	11b: Direct Sequence Spread Spectrum (PBCC, CCK, DQPSK, DBPSK) 11g: Orthogonal Frequency Division Multiplexing
Preamble	11b: both Short and Long preamble 11g: both Short and Long preamble
Security	Hardware-Based Encryption/Decryption Using 64/128 Bit Wired-Equivalent Privacy (WEP) Keys
Media Access Protocol	CSMA/CA (Collision Avoidance) with ACK
Power Requirement	Operating Voltage: 3.3V TX: 340mA RX: 300mA
Receive Sensitivity	802.11b, 8% PER: -82dBm ~ -89dBm 802.11g, 10% PER: -72dBm ~ -88dBm
Physical Specifications	Weight: 47 g Dimension: 133mm long w/bracket 127mm long w/o bracket 47mm height including connector
Environment Specifications	Operating Temperature: 0~60 degree Celsius ambient temperature Storage Temperature: -20~70 degree Celsius ambient temperature Operating humidity: 90% maximum (non-condensing) Storage humidity: 90% maximum (non-condensing)
EMC Certification	FCC Part 15.247 in US EN300328 and EN60950-1 (EN301489-17) in Europe

High-Gain 802.11b/g Wireless USB Adapter with Rotating Connector

WCU5102 enables you to connect your desktop computer or laptop easily to any 802.11b/g network via a USB connection. With a clever USB connector design, which allows you to swivel and rotate to almost any angle plus the Hi-Gain antenna technology, the WCU5102 not only provides a high quality wireless connection, but also extends the distance up to three times further! A compact base stand goes with the Wireless LAN USB Adapter is a convenient option for the desktop users. What even more marvelous is the built-in LED signal strength indicator, which pin-points the strongest signal available within your wireless LAN! The WCU5102 , a small and compact wireless device, is definitely the best choice to carry around for connecting you to the wireless world!

FEATURES

Supports Windows 98SE/ME/2000/XP/X64, Vista X86/X64, Mac OSX 10.3~10.4
21~22dbm transmit power
Compliant with both IEEE 802.11b and 802.11g standard for 2.4GHz Wireless LAN
Up to 54 Mbps data rate
Support USB 2.0
Ad-Hoc or Infrastructure mode
Soft AP feature creates Access Point function
Supports Turbo Mode to enhance the data transfer speed within the specific wireless network
Support WMM function to meet the multi-media data bandwidth requirement
Supports 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), WPA2 (AES with IEEE 802.1x) functions for high level of security

MODEL: WCU5102

SPECIFICATIONS

Standard	IEEE 802.11b/g
Host Interface	Swivel-and-rotate USB 2.0 Type A
Antenna	5dBi Integral patch antenna
Frequency Range	2.400GHz ~ 2.4835GHz
Number of Selectable Channels	USA, Canada: 11 channels Japan: 14 channels Europe: 13 channels
Modulation Technique	Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK) Orthogonal Frequency Division Multiplexing (OFDM)
Security	64/128 bit WEP WPA WPA2 802.1x and 802.11i
Media Access Protocol	CSMA/CA (Collision Avoidance) with ACK
Transmit Power	21~22dBm
Data Rate	802.11g (54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 9Mbps, 6Mbps with auto fall back) 802.11b (11Mbps, 5.5Mbps, 2Mbps, 1Mbps with auto fall back)
Sensitivity	-69dBm @54Mbps -85dBm @11Mbps
Working Mode	Ad-Hoc Infrastructure
Power Consumption	Continuous TX mode: 390mA at 5VDC (Typical) Continuous RX mode: 220mA at 5VDC (Typical)
Environment Specification	Operating Temperature: -0 ~ 55蚓 ambient temperature Storage Temperature: -20 ~ 70蚓 ambient temperature Operating Humidity: 90% maximum (non-condensing) Storage Humidity: 90% maximum (non-condensing)
Regulatory Approval	FCC, CE
LED Indicator	Link: Blue; ACTIVE: Orange Signal strength: (Weak) 1.Red 2.Orange 3.Yellow 4.Blue 5.Blue (Better)
Supported OS	Windows 98SE/ME/2000/XP/X64 Windows Vista X86/X64 Mac OSX 10.3~10.4
Throughput	22Mbps @54Mbps 5.5Mbps @11Mbps
EMI Certification	FCC Part 15.247 in US EN300328 and EN301489-17 in Europe
Dimension	110mm (L) x 34mm (W) x 11mm (H)
Weight	35g

Xterasys 54Mbps 802.11b/g Mini Wireless LAN USB 2.0 Adapter

This Device is the perfect solution for your wireless network applications based on the IEEE 802.11g standard that offers a data rate up to 54Mbps in a wireless LAN environment. It is a high-speed wireless network card that plugs into your notebook or desktop PC and accesses to the LAN or peer-to-peer networking easily without wires or cables. Whether you are at your desk or in the bedroom, it allows you to share printers, files, and other network resources. The USB adapter is designed for a USB type A port of a laptop or a desktop computer.

FEATURES

Compliant with both IEEE 802.11b and 802.11g standard for 2.4GHz Wireless LAN
Up to 54 Mbps data rate
Support USB 2.0
Ad-Hoc or Infrastructure mode
Soft AP feature creates Access Point function
Compact pocket-sized design, lightweight

MODEL: XN-3135G

SPECIFICATIONS

Standard	IEEE 802.11b/g
Host Interface	USB 2.0
USB Connector Type	Type A
Antenna	Chip Antenna
Frequency Range	2.412GHz ~ 2.4835GHz
Number of Selectable Channels	USA, Canada: 11 channels Japan: 14 channels Europe: 13 channels
Modulation Technique	Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK) Orthogonal Frequency Division Multiplexing (OFDM)
Security	64/128 bit WEP WPA WPA2 802.1x and 802.11i
Media Access Protocol	CSMA/CA (Collision Avoidance) with ACK
Output Power	802.11g: 14dBm 802.11b: 17dBm
Data Rate	802.11g (54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 9Mbps, 6Mbps with auto fall back) 802.11b (11Mbps, 5.5Mbps, 2Mbps, 1Mbps with auto fall back)
Sensitivity	-68dBm @54Mbps -80dBm @11Mbps
Working Mode	Ad-Hoc Infrastructure
Environment Specification	Operating Temperature: -0 ~ 55蚓 ambient temperature Storage Temperature: -20 ~ 70蚓 ambient temperature Operating Humidity: 90% maximum (non-condensing) Storage Humidity: 90% maximum (non-condensing)
Regulatory Approval	FCC, CE
Throughput	22Mbps @54Mbps 5.5Mbps @11Mbps
LED Indicator	Act/Link: Blue Active: Orange
Power Requirement	Operating Voltage: 5V DC TX Consumption: 290mA (Max) RX Consumption: 240mA (Max) Standby Consumption: 77mA (Max)
Physical Specification	Weight: 10g Dimension: 71.5 (L) x 19 (W) x 7.9 (H) mm
Supported OS	Windows 98SE/ME Windows 2000 Windows XP
EMI Certification	FCC Part 15.247 in US EN300328 and EN300826 (EN301489-17) in Europe

Multi-Function Portable Mini Wireless 54Mbps Router

OVERVIEW

WAP2102 is a compact / travel size IEEE 802.11b/g Router/Access Point with 1 Fast Ethernet port. Its compact design allows travelers to take it on the go and setup a personal secured wireless network in a hotel room within seconds. Its hardware switch can change wireless mode (Router/AP/Client) in a snap to work with various hotel's Internet settings. With web-based user interface (WebUI), WAP2102 is easy to setup and maintain. All functions can be configured within the easy and friendly WebUI thru any web browser. Via the fast wireless network speed of 54 Mbps, Internet surfing, file downloading, online gaming, and video conferencing runs flawlessly. WAP2102 provides WPA/WPA2, 64/128 bit WEP encryption and IEEE 802.1x to ensure a high level of security for user data and privacy.

FEATURES

Create permanent or temporary personal wireless access in your hotel room or in a coffee shop hotspot
Travel size design
High security with WEP64/128, WPA, WPA2, 802.1x and 802.11i
Support Router, AP, WDS (Bridge + Repeater), and Client wireless modes
Advanced Quality of Service (QoS); 802.11e

Model: WAP2102

SPECIFICATIONS

Standard	IEEE 802.11b/g standard compliant
Antenna	Single Detachable Dipole High Gain Antenna (RP-SMA 2dBi)
Frequency Range	USA (FCC): 2.412 ~ 2.462 GHz Europe (ETSI): 2.412 ~ 2.472 GHz Japan (TELEC): 2.412 ~ 2.483 GHz
Number of Selectable Channels	USA, Canada: 11 channels Europe: 13 channels Japan: 14 channels
Data Rate	802.11b: 11Mbps, 5.5Mbps, 2Mbps, 1Mbps 802.11g: 54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 9Mbps, 6Mbps
Coverage Area	Indoor: 100 meter Outdoor: 300 meter
Transmit Power (EIRP)	11b CCK: 19dBm 11g OFDM: 16dBm
Receive Sensitivity	-68dBm at 54Mbps, 10% PER -82dBm at 11Mbps, 8% PER
Environment	Operating Temperature: -5 ~ 50 蚓 Operating Humidity: 10 ~ 90% Non-Condensing Storage Temperature: -20 ~ 70 蚓 Storage Humidity: 5 ~ 90% Non-Condensing
Power Requirement	AC Adapter Input 100~240V, DC Output 3.3V/1.5A
Physical Specifications	Weight: 58g Dimensions: 83mm x 61mm x 23mm (LxWxH)
EMC Certification	FCC/CE

Micro 150Mbps 802.11n Wireless USB 2.0 Adapter

Only 1.8 cm super mini sized design

1T1R mode with 150Mbps PHY rate for both

Complies with IEEE 802.11n draft 3.0

Complies with IEEE 802.11b/g standards

Supports WEP 64/128, WPA, WPA2

Supports WMM and WMM-PS

Supports WPS configuration

Supports USB 2.0/1.1 interface

Compatible with Windows Vista, XP, 2000

Windows 7 Plug-n-Play

null

1/6

Usage

WU5205

Introduction

This device is an IEEE 802.11bgn USB adapter that connects your PC to a wireless local area. WU5205 fully complies with IEEE 802.11n draft 3.0 and IEEE 802.11b/g standards, delivers reliable, cost-effective, feature rich wireless connectivity at high throughput from an extended distance. WU5205 is a super mini sized adapter, only about 18mm in length, that can be easily stored away for travel. It allows you to take full advantage of your notebook's mobility with real-time information and online services at anytime, anywhere. It also supports Xlink Kai, which is a software that allows PSP or Nintendo DS users to play online games all over the world.

Specification

Antenna (included)	Onboard 2dBi
Approval	FCC
Data Rate	802.11n (20MHz): MCSO-7, up to 72.22Mbps 802.11n (40MHz): MCSO-7, up to 150Mbps 802.11b: 11, 5.5, 2, 1Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6Mbps
Dimension	18.4 (L) x 14 (W) x 7.4 (H) mm (length is 30mm with USB connector)
Frequency	USA (FCC): 2.412GHz ~ 2.482GHz Japan (TELEC): 2.412GHz ~ 2.472GHz Europe (ETS): 2.412GHz ~ 2.472GHz
Humidity	Operating: 10~90% non-condensing Storage: 5~90% non-condensing
Interface	USB 2.0
Power Requirement	Operating Voltage: 5V DC
Security	WEP 64/128bit, WPA, WPA2
Standards	IEEE 802.11n Draft 3.0 IEEE 802.11n Draft 3.0 IEEE 802.11b/g standards
Supported OS	Mac OS 10.3 / 10.4 / 10.5 Windows CE 5.0 / 6.0 Windows 7 Plug-n-Play Windows Vista/XP/2000 Linux
Temperature	Storage: -20 ~ 70°C Operating: -0 ~ 45°C
Weight	4.5g (~0.16oz)
Wireless Channel	USA, Canada: 11 channels Europe: 13 channels Japan: 13 channels

802.11b/g/n Mini Portable AP/Router

Travel size design with optional 2dBi dipole antenna to enhance performance

High security with build-in: WEP 64/128, WPA, WPA2 mixed, 802.1x and 802.11i

Support Router/AP, WDS (Bridge + Repeater), or Client Mode

Support WPS (Push bottom/ Pin code)

Slide Switch to change mode (Gateway/AP/Client) easily

null

1/4

WR5204

Introduction

The WR5204 is a compact/travel size IEEE802.11b/g/n router with 2 Fast Ethernet ports. With web-based UI, this Router/AP is easy to setup and maintain. All functions can be configured within the easy and friendly user interface. Through the high speed wireless network of up to 150 Mbps, you can do web surfing, file downloading, online gaming, video conferencing and multimedia streaming without delay. The WR5204 provides WPA/WPA2, 64/128 bit WEP encryption and IEEE802.1x to ensure a high level of security either at home or on the road.

Specification

Approval / Certification	FCC, CE
Data Throughput	802.11b: 1, 2, 5.5, 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11n: up to 150Mbps
Dimension	76(W)60.5(L)23(H)mm (without Antenna)
Interface	RJ45 *2 ports, Reset button, WPS button, Slide switch, SMA antenna
Power Requirement	Adapter Input: Full Range 100V~240V, Output: 3.3V/1.5A
Standards	IEEE 802.11b, IEEE 802.11g Standard, IEEE 802.11n draft, 1T1R mode
Wireless Antenna	Chip antenna
Wireless Channel	USA,Canada(FCC):11 channels (2.412GHz~2.462GHz) Europe (CE): 13 channels (2.412GHz~2.472GHz) Japan (TELEC): 14 channels (2.412GHz~2.4835GHz)
Wireless Distance	Indoors: up to 50meters /Outdoors: up to 250meters
Wireless Frequency	2.400 ~ 2.4835GHz ( subject to local regulations)
Wireless Rx Sensitivity	11n: 135Mbps 10% PER ~ -66dBm(default) 11g: 54Mbps 10% PER ~ -73dBm(default) 11b: 11Mbps 8% PER ~ -86dBm(default)
Wireless Tx Power	11n: 14dBm(default) 11g: 14dBm(default) 11b: 17dBm(default)

802.11N Wireless Cardbus Adapter

802.11n Wireless Cardbus.

High-Speed Wireless-N Networking for your computer

MIMO Smart Antenna Technology

Compatible with 802.11g/b devices

Overview

The 23460-N - 802.11n Wireless Cardbus delivers an incredible speed to your notebook PC without running wires. It complies with the IEEE 802.11n [Draft 2.0] standard, making it backward compatible with 802.11b/g networks for assured compatibility. Advanced 128-bit WEP encryption is supported to provide secure access for your data. Once you're connected, you can stay in touch with your email, access to the internet and send large files across the network.

Specification

Standards

IEEE 802.11n (Draft 2.0), IEEE 802.11g, IEEE 802.11b standards

Interface

32-bit CardBus

Chipset

Ralink 2760 + 2720

OS Support

Windows 2000 / XP / Vista

User interface

Easy to use user configuration software

roaming

Support multipoint auto roaming and configuration;
Support wireless network environments auto detect.

LED

Status / activity

Antenna type

Two internal printed antennas

Frequency range

2.4 ~ 2.4835GHz

Radio data rate

11n: 150/130/117/104/78/52/39/26/13Mbps
65/58.5/52/39/26/19.5/13/6.5Mbps
11g: 54/48/36/24/18/12/9/6Mbps
11b: 11/5.5/2/1Mbps

Modulation

OFDM, CCK, BPSK, QPSK

Spectrum Spread Technology

DSSS

Transmit output power

11n 20MHz/40MHz: -65dBm
54Mbps: -72dBm
11Mbps: -88dBm

Antenna Gain

1.8dBi x 2

Channels

11 Channels (USA, Canada)
13 Channels (Europe)

Media Access Protocol

WMM

Data security

WPA/WPA2; 64/128-bit WEP; TKIP/AES

Operation Temp

0?C ~ 40?C

Storage Temp

-20?C ~ 70?C

Operation Humidity

10% ~ 90% RH no condensing

802.11g Wireless USB Adapter

802.11g Wireless USB Adapter

?	Complies with IEEE 802.11g and IEEE 802.11b standards.
?	Provides USB2.0 port.
?	Provides up to 54Mbps transmission rate and up to 300 meters transmission distance.
?	Auto-detects and changes the network transmission rate.
?	Provides two work modes: Infrastructure and Ad-Hoc.
?	Supports Soft AP to establish your wireless LAN networking.
?	supports PS3, PSP, Wii and Nintendo DS connecting with Internet and Xlink Kai to enjoy on-line gaming.
?	Supports 64/128-bit WEP, WPA, WPA2 encryption methods and 802.1x security authentication standard.
?	Supports Wireless Roaming function.
?	WPS (Wi-Fi Protected Setup) simplify the security setup and management of Wi-Fi networks.
?	Supports WMM for Multimedia Applications with Quality of Service in Wi-Fi? Networks.
?	Supports Windows 2000/XP/2003/Vista.
?	Easy to install and configure.

Overview

802.11g networks at up to an incredible 54Mbps! And for added versatility, it can also interoperate with all the up to 11Mbps 802.11b products found in homes, businesses, and public wireless hotspots around the country.

Soft AP supported by 24430-G can help you establish wireless LAN networking with lowest cost. Besides, WPS (Wi-Fi Protected Setup) simplify the security setup and management of Wi-Fi networks. Supports WMM for Multimedia Applications with Quality of Service in Wi-Fi? Networks.Especially supporting PS3, PSP, Nintendo DS and Wii connections with Xlink Kai will be your best choice to enjoy on-line gaming.

Specification

Standard

IEEE 802.11b, IEEE 802.11g

Frequency Band

2.4GHz ~ 2.4835GHz

Spread Spectrum

DSSS

Modulation Method

BPSK, QPSK, CCK and OFDM

Data Rate 11g:

54/48/36/24/18/12/9/6Mbps
11b: 11/5.5/2/1Mbps

Transmit Output Power

54Mbps : -72dBm
11Mbps : -88dBm

Channels

11 Channels (USA, Canada)
13 Channels (Europe)
14 Channels (Japan)

Transmit distance

Indoors : up to 100 meters
Outdoors : up to 300 meters

Roaming

Support multipoint auto roaming and configuration
Support wireless network environments auto detect

Antenna

Microstrip antenna

Antenna Gain

2 dBi

Media Access Protocol

WMM

Security

WPA/WPA2; 64/128-bit WEP; TKIP/AES

I/O Interface

USB 2.0

LED Indicators

Status / Activity

Operating System

Windows 2000 / XP / 2003 / Vista

Operating Temp.

0?C ~ 40?C

Storage Temp.

-20?C ~ 70?C

Humidity

10% ~ 90% (non-condensing)

Dimension(L x W x H)

62.6mm x 20.6mm x 10mm

Weight

9.2g

802.11N Wireless USB Adapter

?	High-speed Wireless-N Networking for your computer
?	MIMO Smart Antenna Technology
?	Compatible with 802.11g/b devices

802.11N Wireless USB Adapter provides a simple, portable and secure wireless connectivity to laptop or desktop computer. It lets you put your computer almost anywhere in the building without the cost and hassle of running cables. Once you're connected, you can keep in touch with your e-mail; access the Internet, use instant messaging to chat with friends, and share files and other resources such as printers or hard disk storage space with other computers on the network.

Overview

Standards

IEEE 802.11n, IEEE 802.11g, IEEE 802.11b

Interface

USB2.0

Chipset

Ralink RT2770+RT2720

OS Support

Windows 2000/ XP/ Vista

User interface

Easy to use user configuration software

roaming

Support multipoint auto roaming and configuration;
Support wireless network environments auto detect.

LED

Link / activity

Antenna type

Printed antennas

Power

5V bus powered

Frequency range

2.4000 ~ 2.4835GHz

Radio data rate

11n (20MHz): up to 144Mbps
11n (40MHz): up to 300Mbps
11g: 54/48/36/24/12/9/6Mbps
11b: 11/5.5/2/1Mbps

Modulation

OFDM, CCK, BPSK, QPSK

Spectrum Spread Technology

DSSS

Transmit output power

11n: 14~15 dBm
OFDM: 15dBm ? 2dBm
11Mbps CCK: 16~18dBm

Antenna Gain

2dBi x 2

Channels

11 Channels (USA, Canada)
13 Channels (Europe)
14 Channels (Japan)

Transmission Distance

Indoor: up to 150m
Outdoor: up to 450m
(limited to environment)

Media Access Protocol

WMM

Data security

WPA/WPA2; 64/128-bit WEP; Cisco CCX Support

Operation Temp.

0?C ~ 50?C

Storage Temp.

-20?C ~ 70?C

Operation Humidity

5% ~ 90% RH non-condensing

Storage Humidity

5% ~ 90% RH non-condensing

Wireless Broadband Router w/ 4pt LAN Switch

Wireless Broadband Router w/ 4pt LAN Switch

?	Share your high-speed Internet access with multiple computers
?	Built-in 4 10/100BASE-TX ports with auto MDI/MDIX switch
?	Remote router with 802.11g LAN interface
?	Firewall features NAT with VPN pass-through, MAC, IP, URL Filtering
?	Web-based configuration with easy setup wizard
?	Built-in DHCP server

Wireless Broadband Router with 4 ports LAN switch lets you securely share internet connection with wired and wireless computers. Connects as many computers wirelessly as you want and upto 4 wired computers or daisy chain out to switches to expand the network as you need. It offers upto 54Mbps wireless connection and works with your existing Wireless G and Wireless B devices. The advanced firewall featuring NAT w/VPN pass-through, IP/Port/MAC/URL filtering...etc. The Wireless Broadband Router is the best way to share internet connection, files, printers, and multi-player games with the flexibility and speed!

Chip

Realtek RTL8186+RTL8306S+RTL8225VF

Standards

IEEE 802.11b, IEEE 802.11g, IEEE 802.3, IEEE 802.3u

Antenna

2dBi Omni-Directional antenna

Wireless Frequency Range

2.412GHz to 2.4835GHz

Wireless Signal Rates (With automatic fallback)

54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 11Mbps,
9Mbps, 6Mbps, 5.5Mbps, 2Mbps, 1Mbps

Wireless Transmit Output Power

54Mbps OFDM : 15dBm ? 2dBm
11Mbps CCK : 16dBm ~ 18dBm

Modulation

DBPSK, QPSK, CCK and OFDM(BPSK/QPSK/16-QAM/64-QAM)

Wireless Operating Range

Indoors: up to 100 m / Outdoors: up to 300 m
* Environmental factors may adversely affect operating range

Security

Hardware-Based Encryption/Decryption using 64/128-bit WEP keys and also support WPA/WPA2

Firewall Features

NAT (Network Address Translation) with VPN pass-through
MAC and IP address filtering
URL filtering

LED Indicators

Power/Link/Activity, WAN, LAN,

Dimension(L x W x H)

156 x 102 x 31 mm or 6.1 x 4.0 x 1.2 In.

Temperature

0?C ~ 50? C (operating)
-20?C ~ 70? C (storage)

Humidity

5% ~ 90% non-condensing (operating)
5% ~ 90% non-condensing (storage)

Certifications

FCC, CE

802.11N Wireless PCI Adapter

802.11N Wireless PCI Adapter

?	High-Speed Wireless-N Networking for your computer
?	Supports Multiple Input Multiple Output (MIMO) technology
?	Backwards compatible with IEEE 802.11g and IEEE 802.11b devices
?	Supports 64/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK
?	Supports Windows 2000/XP/Vista

Overview

802.11n Wireless PCI Adapter delivers an incredible speed to your desktop PC without running wires. It complies with the IEEE 802.11n [Draft 2.0] standard, making it backward compatible with 802.11b/g networks for assured compatibility. Advanced 128-bit WEP encryption is supported to provide secure access for your data. Once you're connected, you can stay in touch with your email, access to the internet and send large files across the network.

Specification

Standards

IEEE 802.11n (Draft 2.0), IEEE 802.11g,
IEEE 802.11b

Interface

32-bit PCI interface

Chipset

Ralink 2760 + Ralink 2720

OS Support

Windows 2000 / XP / Vista

User interface

Easy to use user configuration software

roaming

Support multipoint auto roaming and configuration;
Support wireless network environments auto detect.

LED

Status / Activity

Antenna type

External Dipole Antenna (Detachable)

Frequency range

2.4~2.4835GHz

Radio data rate

11n: 150/130/117/104/78/52/39/26/13Mbps
65/58.5/52/39/26/19.5/13/6.5Mbps
11g: 54/48/36/24/18/12/9/6Mbps
11b: 11/5.5/2/1Mbps

Modulation

OFDM, CCK, BPSK, QPSK

Spectrum Spread Technology

DSSS

Transmit output power

11n 20MHz/40MHz: -65dBm
54Mbps: -72dBm
11Mbps: -88dBm

Antenna Gain

1.8dBi x 2

Channels

11 Channels (USA, Canada)
13 Channels (Europe)
14 Channels (Japan)

Media Access Protocol

WMM

Data security

WPA/WPA2; 64/128-bit WEP; TKIP/AES

Operation Temp.

0?C ~ 40?C

Storage Temp.

-20?C ~ 70?C

Operation Humidity

10% ~ 90% RH no condensing

802.11g Wireless Cardbus Adapter

802.11g Wireless Cardbus Adapter

802.11g Wireless Cardbus Adapter delivers an incredible speed to your notebook computer without running wires. It complies with the IEEE 802.11g standard, making it backward compatible with 802.11b networks for assured compatibility. Advanced 128-bit WEP encryption is supported to provide secure access for your data. Once you're connected, you can stay in touch with your email, access to the internet and send large files across the network.

Chipset : RealTek RTL8185L-LF + RTL8225-VF-LF
Host Interface : 32-bit Cardbus interface
Standards : IEEE 802.11b / IEEE 802.11g
Wireless Frequency Range : 2.412GHz ~ 2.4835GHz
Wireless Signal Rates (With automatic fallback) : 802.11b：11Mbps,9Mbps, 6Mbps, 5.5Mbps, 2Mbps, 1Mbps
801.11g：54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 11Mbps, 9Mbps, 6Mbps
Wireless Transmit Output Power : 54Mbps OFDM:15dBm ? 2dBm
11Mbps CCK: 16dBm-18dBm
Modulation: 11g:
Orthogonal Frequency Division Multiplexing (OFDM)
54Mbps/48Mbps:QAM-64
36Mbps/24Mbps:QAM-16
18Mbps/12Mbps:QPSK
9Mbps/6Mbps:BPSK

11b:
Direct Sequence Spread Spectrum(DSSS)
11Mbps/5.5Mbps:CCK
2Mbps:DQPSK
1Mbps:DBPSK

Channels : 11 Channels (US, Canada)
13 Channels (Europe)
14 Channels (Japan)

Security : 64/128-bit WEP, WPA/WPA2
Transmission Distance Indoor: up to 100m
Outdoor: up to 300m
(limited to environment)

Power :3.3V Bus powered
Dimension :119mm(L) x 54mm(W) x 7.5mm(H)
Temperature Operating： 0?C ~ 50?C
Storage：-20?C ~ 70?C
Humidity Operating：5% ~ 90 % non-condensing
Storage：5% ~ 90% non-condensing
Certifications FCC, CE

Extended 2.4GHz IEEE 802.11b/g Wireless Antenna

Improves wireless signal quality

Works with Wireless IEEE 802.11b/g Router/AP/PCI Adapter with Reverse SMA connector

Long 35" cable

2.4~2.5GHz frequency range

Introduction

The 2.4GHz Wireless Antenna Extension allows a user to place the antenna at locations other than the back of the computer. By doing so, wireless reception quality can be improved. Back of a computer case usually has a bunch of cables running around, and it is probably against the wall. In most cases, it is difficult to receive a good signal at the back of a computer case. With the 2.4GHz Wireless Antenna Extension placed at a less distraction area, wireless signal strength can be improved tremendously.

Specification

Admitted Power	1W
Dimension	50 x 50 x 88 (mm) (width x depth x height) Cable Length: 90 cm
Electrical Length	Elesctrical Wave: 1/4 λ Dipole
Frequency	2.4~2.5GHz
Interface	Reverse SMA Plug Straight
Other	Return Loss: -10.0 dB (Min.) V.S.W.R.: 2.0 (Max.) Impedance: 50 Ohms nominal
Polarization	Vertical

Xterasys 802.11b/g Wireless Router With 4 Port Fast Ethernet

OVERVIEW

This Wireless Router is an IEEE 802.11g compliant wireless router with a built-in 4-port fast Ethernet switch. It brings the latest wireless technology with high speed up to 54Mbps and is backwards compatible with all the existing 802.11b products. This high-performance IEEE 802.11g standards-based router connects all of your PC's equipped with wireless PC cards, while an integrated 4-port fast Ethernet switch connects your devices that need Ethernet wiring. It's the easiest way to share and extend your high-speed DSL/Cable modem Internet connections, either with or without wires.

FEATURES

802.11b/g compliant Wi-Fi Certified
Support WEP, WPA Encryption-64bit/128(WEP), WPA TKIP
Support Wireless Auto-channel selection
Support Wireless user access control
Support Wireless site survey
Support TCP/UDP/ICMP/ARP protocol stack
Support Dynamic DNS
Support NAT/NAPT
Support VPN Pass-through with multiple sessions (IPSEC,L2TP,PPTP)
Support Firewall, Dos, IP/Port/MAC filtering
Support Virtual DMZ
Support DHCP Client and Server
Support WAN access mode
Support PPoE PPTP/L2TP
Support DHCP Client
Support Fixed IP address
Support UPnP

Model: XR-2409G

SPECIFICATIONS

Standard	IEEE 802.11b, Wi-Fi compliant/IEEE 802.11g standard
Antenna	Single Detachable Dipole Antenna (RP-SMA 2dBi)
Frequency Range	2.412 ~ 2.4835 GHz
Number of Selectable Channels	USA, Canada: 11 channels Europe: 13 channels Japan: 14 channels
Modulation Technology	802.11b: Direct Sequence Spread Spectrum (PBCC, CCK, DQPSK, DBPSK) 802.11g: Orthogonal frequency division multiplexing
Data Rate	802.11b (11Mbps, 5.5Mbps, 2Mbps, 1Mbps) 802.11g (54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 9Mbps, 6Mbps)
Coverage Area	Indoor: 100 meter Outdoor: 300 meter
Operation Temperature	-10 ~ 60 蚓
Storage Temperature	-20 ~ 70 蚓
Humidity	90%
Transmit Power	OFDM: 14.2dBm (54Mbps) CCK: 18.2dBm (11Mbps)
Receiver Sensitivity	-66dBm (54Mbps), -80dBm (11Mbps)
Power Requirement	DC 12V 800mA
Physical Specifications	Weight: 235g Dimensions: 158mm x 106mm x 27mm (WxDxH)
EMC Certification	FCC/CE
LED Indicator	Power: Green (Power On), Orange (Booting) Internet: Green (Internet Link), Blink (Internet Activity) WLAN: Green (On), Blink (Link/Act) LAN: Green (On), Blink (Link/Act)

54Mbps 802.11b/g Mini Wireless LAN USB 2.0 Adapter

54Mbps 802.11b/g Mini Wireless LAN

USB 2.0 Adapter

Works with both IEEE 802.11b and 802.11g

High Speed USB 2.0 connection

Soft AP feature creates Access Point function

Compliant with both IEEE 802.11b and 802.11g standard for 2.4GHz Wireless LAN

Up to 54 Mbps data rate

Support USB 2.0

Ad-Hoc or Infrastructure mode

Compact pocket-sized design, lightweight

Introduction

Specification

Antenna (included)	Chip Antenna
Data Rate	802.11g (54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 9Mbps, 6Mbps with auto fall back) 802.11b (11Mbps, 5.5Mbps, 2Mbps, 1Mbps with auto fall back)
Dimension	71.5 (L) x 19 (W) x 7.9 (H) mm
EMC Certifications	FCC, CE EN300328 and EN300826 (EN301489-17) in Europe FCC Part 15.247 in US
Frequency	2.412GHz ~ 2.4835GHz
Humidity	Operating: 90% maximum (non-condensing) Storage: 90% maximum (non-condensing)
Interface	USB 2.0
LED Indicator	Active: Orange Act/Link: Blue
Media Access Protocol	CSMA/CA (Collision Avoidance) with ACK
Operation Modes	Infrastructure Ad-Hoc
Output Power	802.11g: 14dBm 802.11b: 17dBm
Power Requirement	RX Consumption: 240mA (Max) TX Consumption: 290mA (Max) Operating Voltage: 5V DC Standby Consumption: 77mA (Max)
Rx Sensitivity	-68dBm @54Mbps -80dBm @11Mbps
Security	WPA 802.1x and 802.11i 64/128 bit WEP WPA2
Standards	IEEE 802.11b/g
Supported OS	Windows 98SE/ME/2000/XP
Temperature	Storage: -20 ~ 70?C ambient temperature Operating: -0 ~ 55?C ambient temperature
Throughput	22Mbps @54Mbps 5.5Mbps @11Mbps
USB Connector Type	Type A
Weight	10g
Wireless Channel	Japan: 14 channels Europe: 13 channels USA, Canada: 11 channels
Wireless Modulation	Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK) Orthogonal Frequency Division Multiplexing (OFDM)

Document & Software

Driver (Linux)

Driver Only (Windows)

Driver and Utility (Windows)

Quick Installation Guide

User Manual

Release Note (Mac Driver)

Driver (Mac OS 10.3.x/10.4.x)

Release Note (Linux Driver)

2.4GHz 9dBi Range Extender Antenna

2.4GHz 9dBi Range Extender Antenna

Up to 12 dB of beam forming gain

Supports most proprietary modes including Atheros SuperG, Static Turbo and Dynamic Turbo

Increases Throughput

Improves wireless signal quality

Works with Wireless IEEE 802.11b/g Router/AP/PCI Adapter with Reverse SMA connector

2.4~2.5GHz frequency range

Provides Uniform Coverage

Simple Single Cable to AP Connection

No Software Required

Introduction

Hi-Gain Wifi MIMO Signal Booster, SAS2800, is a Smart Antenna design that attaches directly to an IEEE 802.11 b/g Access Point (AP) over a coaxial cable. Through the use of adaptive beam forming, SAS2800 simultaneously enhances the AP's overall range and throughput. The SAS2800 is designed for 802.11 b/g (11/54Mbps) dualband applications operating in the 2.4 GHz ISM band. The SAS2800 allows and 802.11 b/g transceiver to employ up to four antenna elements for adaptive antenna processing which results in increased RF receiver sensitivity, extended range and more uniform coverage. The combination of an standard AP and a SAS2800 device significantly improves the system performance over the AP alone, which incorporates advanced combining algorithms that eliminate the need for additional AP processing resources.

Specification

Dimension	127 x 101.6 x 25.4 (mm) ( W x D x H )
Frequency	2.4~2.5GHz 2.3~2.5GHz
Humidity	Operating: 95% non-condensing
Interface	1 SMA Type RF Cable Connector 4 SMA Type Antenna Connectors
LED Indicator	Channel Scanning Channel Number TX Power 4 LED Indicators
Other	RF Input from AP to SAS2800: 23dBm
Power Requirement	DC Adapter Voltage 7.5V
Standards	IEEE 802.11b/g
Temperature	Operating: 0~50 ? C Storage: -40~50 ? C

Xterasys 150Mbps 802.11n Mini Wireless USB 2.0 with Antenna

This device is an IEEE 802.11bgn USB adapter that connects your PC to a wireless local area. WU5214 fully complies with IEEE 802.11n draft 3.0 and IEEE 802.11b/g standards, delivers reliable, cost-effective, feature rich wireless connectivity at high throughput from an extended distance.

WU5214 is a mini sized adapter that can be easily stored away for travel. It allows you to take full advantage of your notebook's mobility with real-time information and online services at anytime, anywhere.

FEATURES

1T1R mode with 150Mbps PHY rate for both
Complies with IEEE 802.11n draft 3.0
Complies with IEEE 802.11b/g standards
Supports WEP 64/128, WPA, WPA2
Supports WMM and WMM-PS
Supports WPS configuration
Supports USB 2.0/1.1 interface
Compatible with Windows Vista, XP, 2000
Compact pocket-sized design, lightweight

SPECIFICATIONS

Standard	IEEE 802.11n Draft 3.0 IEEE 802.11b/g standards
Antenna	Dipole Antenna (2dBi)
Supported OS	Windows Vista Windows 2000 Windows XP
Security	64/128 bit WEP WPA WPA2
Frequency Range	USA (FCC): 2.412GHz ~ 2.482GHz Europe (ETS): 2.412GHz ~ 2.472GHz Japan (TELEC): 2.412GHz ~ 2.472GHz
Number of Selectable Channels	USA, Canada: 11 channels Europe: 13 channels Japan: 13 channels
Host Interface	USB 2.0
Data Rate	802.11n (40MHz): MCSO-7, up to 150Mbps 802.11n (20MHz): MCSO-7, up to 72.22Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6Mbps 802.11b: 11, 5.5, 2, 1Mbps
Physical Specification	Weight: 7.5g Dimension: 55.5 (L) x 19 (W) x 8.1 (H) mm
Environment Specification	Operating Temperature: -0 ~ 45蚓 Storage Temperature: -20 ~ 70蚓 Operating Humidity: 10~90% non-condensing Storage Humidity: 5~90% non-condensing
Power Requirement	Operating Voltage: 5V DC
EMI Certification	FCC

MODEL: WU5214

2.5 to 3.5 IDE Hard Drive Adapter Convertor

Notebook to IDE Hard Drive Adapter Convertor

2.5? Laptop / Notebook Hard Disk Drive to 3.5? Desktop IDE Adaptor

Notebook drive adaptor from 2.5-inch to 3.5-inch

Allows you to connect your laptop 2.5" hard disk drives to your desktop PC

Convert a notebook hard drive for use into a desktop system

This adapter converts a 44 pin laptop hard drive to use like a regular 40 pin IDE hard drive

Connect your laptop drive to a standard IDE cable

Connectors: One End: IDE Hard Drive 40-pin Male Connector, The Other End: Laptop Hard Drive 44-pin Female

HDMI Female to DVI - D Male 360 Degree Rotor Adapter

HDMI Female to DVI - D Male 360 Degree Rotor Adapter

HDMI Male to DVI - D Female 360 Degree Rotor Adapter

HDMI Male to DVI - D Female 360 Degree Rotor Adapter

DVI - I Female to DVI - D Male 360 Degree Rotor Adapter

DVI - I Female to DVI - D Male 360 Degree Rotor Adapter

DVI Female to HD15 Male 360 Degree Rotor Adapter

DVI Female to HD15 Male 360 Degree Rotor Adapter

DVI Male to HD15 Female 360 Degree Rotor Adapter

DVI Male to HD15 Female 360 Degree Rotor Adapter

DVI - D Female to Female 360 Degree Rotor Adapter

DVI - D Female to Female

360 Degree Rotor Adapter

IEEE 1394 a 400 Mpbs 6 Pin Male to 1394b 9 Pin Female 360 Degree Rotor Adapter

IEEE 1394 a 400 Mpbs

6 Pin Male

1394b 9 Pin Female

360 Degree Rotor Adapter

IEEE 1394 a 400 Mpbs 4 Pin Male to 1394b 9 Pin Female 360 Degree Rotor Adapter

IEEE 1394 a 400 Mpbs

4 Pin Male

1394b 9 Pin Female

360 Degree Rotor Adapter

IEEE 1394 a 400 Mpbs 4 Pin Female to 6 Pin Male 360 Degree Rotor Adapter

IEEE 1394 a 400 Mpbs

4 Pin Female to 6 Pin Male

360 Degree Rotor Adapter

IEEE 1394 a 400 Mpbs 4 Pin Male to 6 Pin Female 360 Degree Rotor Adapter

IEEE 1394 a 400 Mpbs
4 Pin Male to 6 Pin Female

360 Degree Rotor Adapter

USB A Female to USB B Female 360 Degree Rotor Adapter

USB A Female to USB B Female

360 Degree Rotor Adapter

HDMI Male to Female 360 Degree Rotor Adapter

24K GOLD HDMI HDTV Plasma DVD TVs LCD Audio Video Rotor Adapter

applications:
Plasma TV's, LCD TV's, HDTV, DVD Players, and Rear-Projection TV's. HDMI cables eliminate unnecessary signal conversions, supports high-definition video, multi-Channel digital audio with a 5Gbps bandwidth, bi-directional signal transfer.

Universal Notebook PC DC/DC Automobile Power Adapter

Product Description

There are seven (7) different output voltages, 12, 15, 16, 18, 19, 20 and 21 VDC, for different models of notebooks & LCDs on the market. Simply adjust to the correct voltage of your notebook or LCD, and connect using one of the supplied six (6) connectors. This adapter is suitable for IBM, Compaq, Dell, HP, Sony, Toshiba, NEC, Sharp, TI, Acer, Samsung, and many more notebooks.

Product Features

Seven adjustbale voltages

Six different sized power jacks.

Size: 11.8 x 6.5 x 4.5 cm

Weight: 500g

Product Specifications

Connector Specification:
4.75 (O.D.) X 1.7 (I.D.) mm - color: yellow
5.0 (O.D.) X 2.1 (I.D.) mm - color: purple
5.5 (O.D.) X 2.5 (I.D.) mm - color: white
6.3 (O.D.) X 3.0 (I.D.) mm - color: green
EIAJ 5.5 (O.D.) X 3.3 (I.D.) X 1.0 (PIN) mm - color: yellow
EIAJ 6.5 (O.D.) X 4.3 (I.D.) X 1.4 (PIN) mm - color: yellow
Power: Input: AC100V ~ AC240V, 50Hz ~ 60Hz; Output: 12~21 VDC, 90W Max

AC/DC Adapter with Adjustable Voltage for Notebooks

Product Description

Product Features

Seven adjustbale voltages

Six different sized power jacks.

Size: 11.8 x 6.5 x 4.5 cm

Weight: 500g

Product Specifications

12 Ft Apple/Macintosh Keyboard/Mouse Extension Cable (M-F)

Apple/Macintosh Keyboard/Mouse Extension Cable (M-F)

Connector: Mini Din 4 pin Male to Female

Cable: 28 awg 4 wire

6 Ft Apple/Macintosh Keyboard/Mouse Extension Cable (M-F)

Apple/Macintosh Keyboard/Mouse Extension Cable (M-F)

Connector: Mini Din 4 pin Male to Female

Cable: 28 awg 4 wire

15 Ft Apple/Macintosh Keyboard/Mouse Cable (M-M)

Apple/Macintosh Keyboard/Mouse Cable (M-M)

Connector: Mini Din 4 pin Male to Male

Cable: 28 awg 4 wire

12 Ft Apple/Macintosh Keyboard/Mouse Cable (M-M)

Apple/Macintosh Keyboard/Mouse Cable (M-M)

Connector: Mini Din 4 pin Male to Male

Cable: 28 awg 4 wire

6 Ft Apple/Macintosh Keyboard/Mouse Cable (M-M)

Apple/Macintosh Keyboard/Mouse Cable (M-M)

Connector: Mini Din 4 pin Male to Male

Cable: 28 awg 4 wire

6 Ft Apple/Mac to HAYES Modem Cable

Apple/Mac to HAYES Modem Cable

Application:
for Apple/Mac Computer to HAYES Modem Adapter Cables

Connector: D-Sub 25 Pin Male to Mini Din 8 Pin Male.

Cable: 28 awg 8 Wire

Lone Screw

10 ft Apple Macintosh Printer Cable

Apple Macintosh Printer Cable

Apple Mac Computer to Printer Cables.

Connector: Mini Din 8 pin Male to Male
Cable: 28 awg 8 wire

2.5mm Plug to 3.5mm Jack Stereo Cable

Apple iPOD / MP3 /Mini iPOD iPod Phone Cellphone, PDAm MP3, MP4, to Car Headphone Cable

Connectoe : 2.5 mm Stereo Plug to 3.5 mm Stereo Jack

Cable : 75Ohm Coaxial Cable Black color

Cable : 6 Inches

2.5mm Stereo Plug to 3.5mm Stereo Plug Audio Cable 3 Ft

Apple iPOD / MP3 /Mini iPOD iPod Phone Cellphone, PDAm MP3, MP4, to Car Headphone Cable

Connectoe : 2.5 mm Stereo Plug to 3.5 mm Stereo Plug

Cable : 75Ohm Coaxial Cable Black color

6 Ft 2.5mm Plug to 3.5mm Plug Stereo Cable

Apple iPOD / MP3 /Mini iPOD iPod Phone Cellphone, PDAm MP3, MP4, to Car Headphone Cable

Connectoe : 2.5 mm Stereo Plug to 3.5 mm Stereo Plug

Cable : 75Ohm Coaxial Cable Black color

3 Ft 2.5mm Plug to 3.5mm Plug Stereo Cable

Apple iPOD / MP3 /Mini iPOD iPod Phone Cellphone, PDAm MP3, MP4, to Car Headphone Cable

Connectoe : 2.5 mm Stereo Plug to 3.5 mm Stereo Plug

Cable : 75Ohm Coaxial Cable Black color